Wire puzzle · Video verified

Which Wire Do You Cut in Short Fuse?

Count the wires, then read only the matching 4-, 5-, or 6-wire section. Test its conditions from top to bottom and cut the wire named by the first true condition; if none match, use that section's final Otherwise rule. The correct color is not fixed. In the recorded five-wire example, yellow-yellow-yellow-black-blue falls through to the first wire.

On-screen reference

The Short Fuse wire manual

These conditions are transcribed from the visible August 2026 manual. Within the matching wire-count section, apply the first true line only.

If the device has 4 wires

• If more than one wire is red and the serial's last digit is odd, cut the last red wire.
• Otherwise, if the last wire is yellow and there are no red wires, cut the first wire.
• Otherwise, if exactly one wire is blue, cut the blue wire.
• Otherwise, cut the last wire.

If the device has 5 wires

• If the last wire is black and the serial's last digit is odd, cut the fourth wire.
• Otherwise, if exactly one wire is red and more than one wire is yellow, cut the first wire.
• Otherwise, if there are no black wires, cut the second wire.
• Otherwise, cut the first wire.

The recorded yellow-yellow-yellow-black-blue device reached this final Otherwise line, so the player cut wire 1.

If the device has 6 wires

• If there are no yellow wires and the serial's last digit is odd, cut the third wire.
• Otherwise, if exactly one wire is yellow and more than one wire is white, cut the fourth wire.
• Otherwise, if there are no red wires, cut the last wire.
• Otherwise, cut the fourth wire.

Direct objective

What You Need to Do

Match the visible wire count to the manual, read its conditions in order, and stop at the first condition that matches both the colors and the serial number. Cut exactly one wire.

Verified sequence

Step-by-Step Instructions

Count the visible wires; the manual has separate sections for four, five, and six wires.
Read the last digit of the device serial number and note whether it is odd.
In the matching wire-count section, test the first condition against the current colors and serial number.
Continue downward only while a condition is false; the first true condition decides the wire.
If none of the special conditions match, follow that section's final Otherwise line.
Cut exactly the named wire and wait for the green RENDER SAFE result.

Stop when you see this

Success Condition

The selected wire is severed, the device remains inert, and a green RENDER SAFE stamp appears before the method completes.

Repeatable facts

What Stays the Same?

✓ The manual is divided by wire count and must be read from top to bottom.
✓ Only one wire should be cut, and the first matching condition wins.
✓ The serial number's final digit matters in some branches.

Run-specific details

What May Change Each Run?

↻ The number, colors, order, and device serial can change between runs.
↻ The correct wire therefore changes with the generated device; no color is universally safe.

Troubleshooting

Common Reasons It Fails

Retry the method itself first. These failure checks stay within what the reviewed gameplay can support.

Check 1

You use the wrong wire-count section of the manual.

Check 2

You skip an earlier matching condition and apply a later Otherwise rule.

Check 3

You ignore whether the serial number's last digit is odd.

Check 4

You copy the recorded first-wire result even though your colors differ.

Evidence record

Sources and Verification

Locally reviewed main gameplay recording

Reviewed 2026-08-29 · action 00:26:32–00:26:40

The complete manual, five-wire device, first-wire cut, and RENDER SAFE result are visible. The Skip control was not used.

Official Roblox badge inventory

Reviewed 2026-08-29 · Short Fuse badge

The creator-written badge description confirms that success means cutting the right wire; it does not claim one fixed color.

Source footage was reviewed locally and is not republished here. Skip was not used. Evidence was checked against game version August 2026 recorded build. An independent replay test is still pending.

Did these steps get you through the login?

Anonymous feedback helps prioritize which verified guide needs another replay check.

FAQ

Questions About This Method

Is the Short Fuse wire color always the same?

No. The manual branches on wire count, color order, and sometimes the serial number, so use the device shown in your own run.

Do I check every condition in the section?

Check them in order and stop at the first true condition. Use the final Otherwise line only when every earlier condition is false.

How do I know the wire was correct?

The wire is visibly cut and the device displays the green RENDER SAFE result instead of a failure state.

Keep playing

Related Login Methods

Assembly puzzle